Georgia Roof Replacement Companies

A problem with the roof on your Georgia home can be a big inconvenience and therefore the problem must be handled as soon as possible. A roof develops problems when there are blockages and breakages. Breakage can be due to falling branches or tree limbs if there are many trees around the house. Blockages can be caused if the roof is not cleaned regularly.

Tips that can ensure that the roof of your Georgia house is healthy

1. Extreme temperatures can cause the roof shingles to become brittle and therefore, traffic on the roof during these times should be a minimum. This means a person should avoid walking up the roof but use binoculars to keep a tab on the condition of the roof.

2. Periodical cleaning of the roof is essential to keep it free from falling leaves, debris, dirt and other materials. This ensures that there are no blockages and water does not stand in to cause leaks later.

3. Any loose shingles or tiles must be checked. In addition, the chipped or broken tiles must also be assessed. All these tiles and shingles must either be repaired or replaced to avoid leakages.

4. The downspouts and drains should be checked for debris and fallen leaves.

5. It is very essential to remove any moss, algae or other such material on the roof. Use a chlorine bleach solution that helps in the removal of these materials so that they may not absorb water and damage the roof.

Small faults and problems if tackled early can prevent them from snowballing into bigger problems requiring complete roof replacement. Therefore, the roof should be periodically, checked, cleaned and maintained, to avoid any problems, later on.

Instead of undertaking the roof job by your self, it is always better to call a roofing expert since they are adequately equipped and have the relevant of handling such tasks.

new roof construction

What is a Roof Recycling Program?

When it comes to roofing material, most homeowners want something that is durable and long lasting, yet affordable. For a long time they had to choose between a high-cost tile or slate roof that lasted a good amount of time but required extra bracing to support its weight and they aren't cheap, or shake or shingle roofs that were less expensive but had a short lifespan. Now homeowners can have the best of both worlds with metal roofing.

While upfront you may pay slightly more for a metal roof over shake or shingle, the benefits of a metal roof far outweigh the difference. For one, your metal roof will last a lot longer than these other materials, so you are saving yourself from paying for a new roof over the next 40-50 years. Some appraisers are even adding about $1.25 per square foot to the appraised price of the home if it has a metal roof on it!

Since a metal roof will reflect heat in the summer there are additional savings when it gets hot. Metal roofs allow your home to stay cooler in hot weather, which can save you up to 40% in cooling costs. There is also little maintenance involved to keep a metal roof, so you won't have to pay someone to come to your home and make repairs.

A metal roof is lightweight, and it will not crack, bend or warp like other building materials. Over many years your metal roof will stay looking great, while your neighbor's asphalt roof begins to grow moss and crack around the edges. You can get a metal roof in nearly any color you like, and if you don't like the standard sheet-type metal roof then try looking at the new types of patterns that are made to look like tiles or shingles.

If you live in an area where you get high winds, then a metal roof will save you money here as well. Metal roofs can withstand up to 120mph winds, so after a big storm you won't be picking pieces of your roof out of the trees around your home. You can sit on the porch instead and watch everyone else repair their roofs.

Installing a metal roof also costs less. Normally a metal roof can be added to the home without removing the previous roofing material which will save on the cost of disposal and the time to take it off. One or two people can install the roof, and it doesn't have to be done by a professional. As long as you can follow the instructions that come with the roofing material you should be fine.

Since metal roofing weighs less than shake or shingle, you will pay less to have it shipped to your home, and there will be little to no waste produced as the sheets should exactly fit your home. Once completed you will have a lovely new roof that will likely last longer than the time you will spend living in your home.

new roof guarantee

Roof Repair Cost - How to Hire the Right Roofing Contractor

Flat roofs are completely different from sloped roofs. Water can run down sloped roofs and go down to the drain. But that is not the case on flat roofs. The entire flat roof must have a layer of watertight seal so that water cannot come through the roof and cause leaks in the house. But like the sloped roof, flat roofs can get damaged and thus need roof repair. It's a good thing that you can do roof repair on flat roofs, as long as you know how to. How do you do it? Here's how.

The first thing you should do is to prepare the items you'll need for the roof repair. Get a mallet, roofing nails, putty knife, utility knife, brooms and roofing cement. These are all the materials needed to repair your flat roof.

To begin roof repair, go to your roof and locate the problems. If you found peeled regions or fractures on it, then do the following steps: Get rid of the dust and dirt on the roof using the broom. Roofing cement cannot stick on surfaces with dirt, that's why you need to make sure that the entire area is clean. Now cut a shape on to the area where the fracture or peel was discovered. If there are multiple fractures or peels, make use of the same shapes for uniformity. Use the cut shape to make a pattern on the replacement shingles. The size and shape that you create on the replacement shingle should be accurate. If you made a mistake on the size, create multiple replacement shingles so that the shingles can be on the same level as the area on it. Make another replacement shingle. This one must be at least 2 inches larger than the other shingles.

Put the putty knife in the area of the edges. Put roofing cement under the edges. Now, attach the shingle on the hole and nail it down. Cement the shingle. If you are going to use multiple shingles to level the area, the other shingles must not be cemented. Just hammer it down with nails. Tack down the larger replacement shingle on the area and put roofing cement on its edges for the seal.

If there are split shingles on your flat roof, then you need to do a different method. First, slash the shingle into two. Open the slashed area and put roofing cement on it. Use roofing nails to tack down the sides of the shingle. Add a replacement shingle using a similar method as described on the repairing of fractured areas.

Roof repair for your flat roof should now be done. You are now protected from water leaks in the meanwhile. Check your roof regularly to maintain it and prevent anymore leaks.

Offering professional roofing services to the following Georgia areas: