Metal Roof Installation Lawrenceville

When it comes time to do repair work on your Lawrenceville roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own.

A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don’t have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it’s time to do something about it now. You don’t want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.

Choosing a Lawrenceville Georgia Roof Installation Contractor

Now that you know that you must tackle this job, you need to see where the problem actually is coming from. If you are going to try to tackle this job on your own, then it’s time to do some investigating. The roof cavity is the best place to start. Check for signs of a leak, water stains, mold or moisture damage. Oftentimes, this may be in an attic area or around a chimney.

roof replacement vs repair

Roofing professionals are called professionals for a very good reason. They are skilled at their given profession, which in this case would be roofing. They know what needs to be done to fix a roof properly and they also have the tools and equipment to do the work. Also, a professional roofer is used to working on roofs. Their chances of falling and hurting themselves are much less than if you attempt to try it. There are many accidents each year by people who are not in good health attempting to climb on roofs to do the job themselves.

When choosing a professional, however, don’t be too hasty in making your decision. As in any profession, there are going to be variations on roofing companies. While some will be more expensive, some will cost less, but this doesn’t mean that they are going to do a good job. On the other hand, you must use good discretion and ask questions to make sure you are getting what you pay for.

A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.

roof replacement help

3 of the Best Roofing Materials - Learn the Facts About Residential Roofing Materials

The two most common types of roofs for commercial structures are flat and pitched roofs. Each has their advantages and disadvantages for construction, and also their own challenges for leak repair.

Flat Roofs

Flat roofs are popular for commercial roofing because of their inexpensive design and the ability to house large mechanics, such as industrial air conditioners, upon the level surface. However, the flat design suffers when it comes to rain and snow, making most repairs related to weather leakage. Thankfully, patching a leak is a relatively straightforward task.

For the first step, a professional will need to locate the leak. That sounds elementary, but if your building has a BUR flat roof (Built-Up Roofs, the "tar and gravel" style) this might be the first big challenge as BUR roofs are notoriously difficult to find leaks. Single-Ply roofs (rubber membrane roofs), on the other hand, because of their seam sealed design make finding leaks easier. However, punctures and cracks are also more common.

After the damaged area is found, a professional will sweep the area of extra debris (BUR roof gravel can break loose over years of weather exposure) and then cut a patch around the leak as uniformly shaped as possible. Using that cut out area as a guide, the repairman will cut a replacement patch. The important part here will be to cut enough replacement pieces (or shingles) to build up all of the layers of the roof. BUR roofs can have many layers, as that is their core design. Here the benefit for the Single-Ply roof, being literally a single layer, will come into play with much less repair materials needed. Once the layers are replaced with the new cut shingles, a larger shingle will be cut to place overtop the patched area and sealed to prevent leakage through the cut seams.

Pitched Roofs

Pitched roofs have a slope of more than 10 degrees to the horizontal surface. Although less common than flat roofs for commercial buildings, they are still used, especially in areas of heavy snowfall. Leaks on pitched roofs can come from problems with the shingles or tiles, but also in the flashing or valleys. Flashing is the sheet metal used around structures on a roof, such as chimneys, that is designed to force water down and away from seams. Valleys are lead lined areas found on multiple pitched roofs used for water runoff creating a gutter effect where the two pitches meet.

If you do live in an area of extreme weather, repairing a pitched roof will be considerably more difficult in the bad months, especially for the safety of the repairman. Usually he or she will look under the roof on the interior to find the leak, and then where the leakage is will determine the repairs.

For damaged shingles, a shingle ripper will be used to detach the shingle from the roof. Most are held by four or more nails (depending on the type of shingle). Then a new shingle will be slid into place, nailed down, and sealed. Clay or rounded tiles will require the chipping away of the securing mortar, tile replacement, and then reapplying of the mortar. If the flashing or valleys are damaged, the professional will have to determine whether the area can be patched or requires replacement. For cracks, flashing tape can be adhered to the roof to prevent further leakage. However, in more severe damage, the entire flashing or valley may need to be removed and replaced.

Do not hesitate to seek help for leakage repair as the more the area is exposed to the elements, the more advanced the repair job will be. If you think your roof may have a leak, contact a commercial roofing repair specialist or a commercial roofing company near you.

new roof construction

Roof Replacement Tips

Common residential roofing materials are asphalt shingles, tile made of several different materials, and varieties of metal. Each group has choices of material, color, and style, and each kind of roofing will vary in cost, length of service, and the amount of regular maintenance required. This article will give you some information on the three best all around residential roofing materials.

Residential Asphalt Roofing Material

Asphalt is used to make both paper and fiberglass shingles weatherproof and durable. Asphalt shingles are coated with ceramic granules to make them more resistant to the effects of sunlight and in some cases to retard the growth of algae on the roof. These granules also make a choice of color possible. With an asphalt roof, proper installation and sealing is very important; if there are any leaks in the nail holes or the flashing, the roof will not last as long as it should.

Tile Roofing Material

Another popular roofing type is tile, and the material may be clay, concrete, or slate. These roofs are very classy, are often found on older homes, and are used on upscale new construction. The styles include traditional red Spanish tiles, slightly more rugged and often multicolored Mission tiles, elegant French and European tiling, and slate tiles which resemble shingles but are usually more irregular in shape.

Tile is another familiar type of roof, especially in dry, southwestern areas of the United States and the Mediterranean area of Europe. Many fine European city houses have elegant tile roofs, as well. Clay is used for the traditional red Spanish tiles and the rougher and often multi-colored Mission style tiles. Concrete tiles are also very traditional, as is slate. Many historic restorations and upscale new homes have tile for the elegant look it gives to a building. Tile is good for hot areas, since it does not disintegrate under UV rays.

Metal Roofing Material

The next category is metal roofing, which costs about the same as cedar shakes or tile, but has almost no maintenance costs over its very long life span. Thirty to fifty year warranties are given on many types of metal roofs. The traditional ridged or ribbed metal roofs are still fashionable, but today a metal roof can look like any other popular material. The facsimiles of shingles, shakes, tiles, or slates come in every imaginable color and have factory-baked paint that will never need to be replaced.

Metal roofs are very durable, especially when made with the new, factory-painted materials used in even the most elegant houses. Copper, of course, is still used by those who want a non-corroding roof and do not have to worry about the cost. But other metals are now finished to last for fifty years and more, without ever needing to be repainted.

When assessing common roofing materials, think of both the short and long term investment picture, as well as the effect of the finished roof on the beauty of your home. I'm sure you have more questions about green roofing, roll roofing and how to select a contractor. Check out the links below for additional helpful free resources.

roof replacement vs repair