When it comes time to do repair work on your Stockbridge roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own.
A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don’t have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it’s time to do something about it now. You don’t want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.
Choosing a Stockbridge Georgia Roof Installation Contractor
Now that you know that you must tackle this job, you need to see where the problem actually is coming from. If you are going to try to tackle this job on your own, then it’s time to do some investigating. The roof cavity is the best place to start. Check for signs of a leak, water stains, mold or moisture damage. Oftentimes, this may be in an attic area or around a chimney.
Roofing professionals are called professionals for a very good reason. They are skilled at their given profession, which in this case would be roofing. They know what needs to be done to fix a roof properly and they also have the tools and equipment to do the work. Also, a professional roofer is used to working on roofs. Their chances of falling and hurting themselves are much less than if you attempt to try it. There are many accidents each year by people who are not in good health attempting to climb on roofs to do the job themselves.
When choosing a professional, however, don’t be too hasty in making your decision. As in any profession, there are going to be variations on roofing companies. While some will be more expensive, some will cost less, but this doesn’t mean that they are going to do a good job. On the other hand, you must use good discretion and ask questions to make sure you are getting what you pay for.
A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.
7 Essential Tips for Commercial Roofing Maintenance and Protection
Flat roofs are completely different from sloped roofs. Water can run down sloped roofs and go down to the drain. But that is not the case on flat roofs. The entire flat roof must have a layer of watertight seal so that water cannot come through the roof and cause leaks in the house. But like the sloped roof, flat roofs can get damaged and thus need roof repair. It's a good thing that you can do roof repair on flat roofs, as long as you know how to. How do you do it? Here's how.
The first thing you should do is to prepare the items you'll need for the roof repair. Get a mallet, roofing nails, putty knife, utility knife, brooms and roofing cement. These are all the materials needed to repair your flat roof.
To begin roof repair, go to your roof and locate the problems. If you found peeled regions or fractures on it, then do the following steps: Get rid of the dust and dirt on the roof using the broom. Roofing cement cannot stick on surfaces with dirt, that's why you need to make sure that the entire area is clean. Now cut a shape on to the area where the fracture or peel was discovered. If there are multiple fractures or peels, make use of the same shapes for uniformity. Use the cut shape to make a pattern on the replacement shingles. The size and shape that you create on the replacement shingle should be accurate. If you made a mistake on the size, create multiple replacement shingles so that the shingles can be on the same level as the area on it. Make another replacement shingle. This one must be at least 2 inches larger than the other shingles.
Put the putty knife in the area of the edges. Put roofing cement under the edges. Now, attach the shingle on the hole and nail it down. Cement the shingle. If you are going to use multiple shingles to level the area, the other shingles must not be cemented. Just hammer it down with nails. Tack down the larger replacement shingle on the area and put roofing cement on its edges for the seal.
If there are split shingles on your flat roof, then you need to do a different method. First, slash the shingle into two. Open the slashed area and put roofing cement on it. Use roofing nails to tack down the sides of the shingle. Add a replacement shingle using a similar method as described on the repairing of fractured areas.
Roof repair for your flat roof should now be done. You are now protected from water leaks in the meanwhile. Check your roof regularly to maintain it and prevent anymore leaks.
7 Essential Tips for Commercial Roofing Maintenance and Protection
If you own a business then it's inevitable that some day you'll need to have a roof replacement. Years of exposure and wear and tear will take its toll, especially if routine maintenance was not done, and you'll ultimately face some tough decisions regarding your roof. In the best case scenario, you may not need a total roof replacement and will only have to repair select damaged areas; if more serious damage has occurred then a total roof repair replacement will be your only option. You may not be an expert in roofing replacement, but an experienced professional commercial roofing company can assist you in addressing your roofing needs and on ways to save on the cost of roof replacement as well.
Many business owners procrastinate or totally ignore regular roof maintenance and repairs, until it is too late, which is a costly mistake. It is much cheaper to take preventative measures to ensure that your roof lasts than it is to incur the cost of a total roof replacement. What may initially seem like a minor leak or small hole in your commercial roof can cause major problems both on the roof and inside your building sooner than you think. Whether you need a metal roof replacement or a flat roof replacement, both can be a large undertaking depending on the nature of the roof damage.
Common causes of roof damage are varied, but aside from typical weather exposure can include roof overload, blocked gutters, and even fire. A more serious cause of roof damage is asbestos exposure, which is extremely dangerous and harmful once the asbestos is airborne. Asbestos roof encapsulation is available if asbestos was used in the roofing materials but has not been exposed. In this process Insultec, a heat reflective membrane, will be used as a protective barrier to eliminate the possibility of the asbestos fibers becoming airborne and subsequently inhaled by humans. In the unfortunate event that the asbestos is proven to be airborne, then asbestos roof replacement will be necessary and you will need to seek the help of asbestos removal professionals. It is not advisable and is even against the law in some areas to remove asbestos on your own.
Insultec is not only an effective asbestos roof encapsulation product but can be used in various ways during any roof replacement project due to its ability to serve as a protective barrier from heat and water damage. On areas where major damage has not happened, it can serve as a very cost effective method of even avoiding total roof replacement. Using Insultec is a win-win situation, no matter what your roofing needs are.