When it comes time to do repair work on your Bowdon roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own.
A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don’t have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it’s time to do something about it now. You don’t want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.
Choosing a Bowdon Georgia Roof Installation Contractor
Now that you know that you must tackle this job, you need to see where the problem actually is coming from. If you are going to try to tackle this job on your own, then it’s time to do some investigating. The roof cavity is the best place to start. Check for signs of a leak, water stains, mold or moisture damage. Oftentimes, this may be in an attic area or around a chimney.
Roofing professionals are called professionals for a very good reason. They are skilled at their given profession, which in this case would be roofing. They know what needs to be done to fix a roof properly and they also have the tools and equipment to do the work. Also, a professional roofer is used to working on roofs. Their chances of falling and hurting themselves are much less than if you attempt to try it. There are many accidents each year by people who are not in good health attempting to climb on roofs to do the job themselves.
When choosing a professional, however, don’t be too hasty in making your decision. As in any profession, there are going to be variations on roofing companies. While some will be more expensive, some will cost less, but this doesn’t mean that they are going to do a good job. On the other hand, you must use good discretion and ask questions to make sure you are getting what you pay for.
A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.
Roof Repair Cost - How to Hire the Right Roofing Contractor
Flat roofs are completely different from sloped roofs. Water can run down sloped roofs and go down to the drain. But that is not the case on flat roofs. The entire flat roof must have a layer of watertight seal so that water cannot come through the roof and cause leaks in the house. But like the sloped roof, flat roofs can get damaged and thus need roof repair. It's a good thing that you can do roof repair on flat roofs, as long as you know how to. How do you do it? Here's how.
The first thing you should do is to prepare the items you'll need for the roof repair. Get a mallet, roofing nails, putty knife, utility knife, brooms and roofing cement. These are all the materials needed to repair your flat roof.
To begin roof repair, go to your roof and locate the problems. If you found peeled regions or fractures on it, then do the following steps: Get rid of the dust and dirt on the roof using the broom. Roofing cement cannot stick on surfaces with dirt, that's why you need to make sure that the entire area is clean. Now cut a shape on to the area where the fracture or peel was discovered. If there are multiple fractures or peels, make use of the same shapes for uniformity. Use the cut shape to make a pattern on the replacement shingles. The size and shape that you create on the replacement shingle should be accurate. If you made a mistake on the size, create multiple replacement shingles so that the shingles can be on the same level as the area on it. Make another replacement shingle. This one must be at least 2 inches larger than the other shingles.
Put the putty knife in the area of the edges. Put roofing cement under the edges. Now, attach the shingle on the hole and nail it down. Cement the shingle. If you are going to use multiple shingles to level the area, the other shingles must not be cemented. Just hammer it down with nails. Tack down the larger replacement shingle on the area and put roofing cement on its edges for the seal.
If there are split shingles on your flat roof, then you need to do a different method. First, slash the shingle into two. Open the slashed area and put roofing cement on it. Use roofing nails to tack down the sides of the shingle. Add a replacement shingle using a similar method as described on the repairing of fractured areas.
Roof repair for your flat roof should now be done. You are now protected from water leaks in the meanwhile. Check your roof regularly to maintain it and prevent anymore leaks.
Flat Roof Repair Advice
Roofing repair companies range from reputable contractors who perform excellent work to unreliable contracts who perform poor work, and sometimes fail to finish the job. Knowing the difference between these types of contractors can be difficult during the bidding phase. This is why it is important to research each contractor to see if they have the right credentials and experience for the job. Before hiring a provider of roofing maintenance, be sure that the contractor has the characteristics below.
Licensed, Bonded, and Insured
Hiring a contractor that lacks a contractor's license, bonding, or insurance increases the risk for receiving poor workmanship, not being compensated for property that is stolen during the project, and not being compensated for a personal injury or property damage that occurs during the project. Before hiring a contractor, ask to see proof that they are licensed, bonded, and insured to perform roofing.
Experience Working with Individual Roof Types
Whether the roof is composed of shingles, tiles, or metal panels, a contractor should have experience installing and maintaining each type of roof. A common misconception among homeowners is that roofing repair companies specialize in repairing and maintaining all types of roof systems. Providers of roof maintenance often work with more than one type of system. However, unless they specialize in working with individual types of roof, they may not offer the best service.
Has a Physical Business Location
Reputable contractors typically have a physical business location. Roofing contractors have every reason to establish a physical business location that contains a business office and a facility for storing equipment because roofing companies succeed by developing a strong customer base that generates returning customers. Contractors who lack a permanent location often travel from mediocre job to mediocre job that never lead to the development of a solid customer base.
A contractor should have an impressive list of references that testifies to the excellence of his or her work. If the contractor does not, the logical conclusion is that their work fails to impress his or her customers. Great references are a direct result of great work. If a contractor has bad or no references, find a different contractor.
Willing to Put Everything in Writing
Before the contractor begins work, the terms of the project should be put in writing, especially the completion date, the terms of the work order, and the total cost of the project. If a contractor refuses to put an important aspect of the project in writing, finding a different contractor who will honor the terms is the safest idea.
Buildings require roof repair for various reasons, including weather damage, the effects of aging, and improper installation jobs. However, the quality of the repair depends on the credentials and experience of the contractor who performs the work. If a building needs roofing repair, be sure to hire a provider of roof maintenance who displays the characteristics listed above.