Metal Roof Replacement Conley

When it comes time to do repair work on your Conley roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own.

A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don’t have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it’s time to do something about it now. You don’t want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.

Choosing a Conley Georgia Roof Installation Contractor

Now that you know that you must tackle this job, you need to see where the problem actually is coming from. If you are going to try to tackle this job on your own, then it’s time to do some investigating. The roof cavity is the best place to start. Check for signs of a leak, water stains, mold or moisture damage. Oftentimes, this may be in an attic area or around a chimney.

new roof installation

Roofing professionals are called professionals for a very good reason. They are skilled at their given profession, which in this case would be roofing. They know what needs to be done to fix a roof properly and they also have the tools and equipment to do the work. Also, a professional roofer is used to working on roofs. Their chances of falling and hurting themselves are much less than if you attempt to try it. There are many accidents each year by people who are not in good health attempting to climb on roofs to do the job themselves.

When choosing a professional, however, don’t be too hasty in making your decision. As in any profession, there are going to be variations on roofing companies. While some will be more expensive, some will cost less, but this doesn’t mean that they are going to do a good job. On the other hand, you must use good discretion and ask questions to make sure you are getting what you pay for.

A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.

roof replacement atlanta

What is a Roof Recycling Program?

The two most common types of roofs for commercial structures are flat and pitched roofs. Each has their advantages and disadvantages for construction, and also their own challenges for leak repair.

Flat Roofs

Flat roofs are popular for commercial roofing because of their inexpensive design and the ability to house large mechanics, such as industrial air conditioners, upon the level surface. However, the flat design suffers when it comes to rain and snow, making most repairs related to weather leakage. Thankfully, patching a leak is a relatively straightforward task.

For the first step, a professional will need to locate the leak. That sounds elementary, but if your building has a BUR flat roof (Built-Up Roofs, the "tar and gravel" style) this might be the first big challenge as BUR roofs are notoriously difficult to find leaks. Single-Ply roofs (rubber membrane roofs), on the other hand, because of their seam sealed design make finding leaks easier. However, punctures and cracks are also more common.

After the damaged area is found, a professional will sweep the area of extra debris (BUR roof gravel can break loose over years of weather exposure) and then cut a patch around the leak as uniformly shaped as possible. Using that cut out area as a guide, the repairman will cut a replacement patch. The important part here will be to cut enough replacement pieces (or shingles) to build up all of the layers of the roof. BUR roofs can have many layers, as that is their core design. Here the benefit for the Single-Ply roof, being literally a single layer, will come into play with much less repair materials needed. Once the layers are replaced with the new cut shingles, a larger shingle will be cut to place overtop the patched area and sealed to prevent leakage through the cut seams.

Pitched Roofs

Pitched roofs have a slope of more than 10 degrees to the horizontal surface. Although less common than flat roofs for commercial buildings, they are still used, especially in areas of heavy snowfall. Leaks on pitched roofs can come from problems with the shingles or tiles, but also in the flashing or valleys. Flashing is the sheet metal used around structures on a roof, such as chimneys, that is designed to force water down and away from seams. Valleys are lead lined areas found on multiple pitched roofs used for water runoff creating a gutter effect where the two pitches meet.

If you do live in an area of extreme weather, repairing a pitched roof will be considerably more difficult in the bad months, especially for the safety of the repairman. Usually he or she will look under the roof on the interior to find the leak, and then where the leakage is will determine the repairs.

For damaged shingles, a shingle ripper will be used to detach the shingle from the roof. Most are held by four or more nails (depending on the type of shingle). Then a new shingle will be slid into place, nailed down, and sealed. Clay or rounded tiles will require the chipping away of the securing mortar, tile replacement, and then reapplying of the mortar. If the flashing or valleys are damaged, the professional will have to determine whether the area can be patched or requires replacement. For cracks, flashing tape can be adhered to the roof to prevent further leakage. However, in more severe damage, the entire flashing or valley may need to be removed and replaced.

Do not hesitate to seek help for leakage repair as the more the area is exposed to the elements, the more advanced the repair job will be. If you think your roof may have a leak, contact a commercial roofing repair specialist or a commercial roofing company near you.

new roof guarantee

Roof Repair - How to Repair Flat Roofs

Need a new roof? Thinking about tackling your roof replacement yourself? Think again! There are major reasons--from safety to roof performance--to leave installing new shingles to the pros.

Roof shingles are just one of those things that eventually need to be replaced. Even with today's highly engineered roofing materials, you'll find the average life span of an asphalt roof is typically only about 35 years. When the time comes to replace your roof, many avid do-it-yourselfers tend to take the "how hard can it be" approach and tackle their own roof replacement. But if you're considering that route, make sure you think it all the way through before grabbing the nail gun--roofing installation/replacement gone wrong can have some serious repercussions for your health and the safety of your home.

The National Center for Health Statistics reports that between 2008 and 2009 (the last year for which statistics are available), some 890,000 people went to the emergency room for fall-related injuries. The simple truth is that getting up on the roof to replace your shingles is dangerous. Especially if you have a multi-story home or a steep roof, you're putting yourself at risk for a major fall if you try to handle your own roof installation. Professional roofing contractors are both trained and experienced, and they have the know-how to handle the heights safely. If you're still not worried about the safety risks, remember, that you'll be doing a lot more than just walking around on the roof: tearing off the old shingles, rolling out new felt, handling the new shingles and nail gun, etc., are all hard jobs that can easily throw your balance off. And just a momentary shift in balance can mean you're headed to the ER with a broken leg or worse!

Beyond the safety aspects, it's also important to keep quality in mind. Your roof is what protects your whole house from the adverse effects of water damage caused by precipitation, so it's particularly critical that this project be done right. Roofing installation has many steps, from putting down the felt underlayment to actually nailing down the shingles themselves. Add in ridge vents and installing flashing around chimneys and vent stacks, and it's easy to get overwhelmed fast. Each step has to be done correctly and at the right point in the process or you risk making a mistake that could lead to water penetrating your home.

With do-it-yourself projects like painting or gardening, typically the worst side effect of a mistake or incorrect approach is aesthetic (dripped paint or dead bushes, for example). However, when roof installation isn't done right, it can mean water leaking into your home. And with water comes possible structural concerns as well as mold and its related health issues.

So it's just not worth it. Instead of trying to be a weekend warrior with your roof, call in the pros instead. You'll reap the benefit of safety for your home as well as yourself by letting professional roofers handle the project. Roofing contractors have the training and tools to get the job done right, so don't hesitate to call them in for your roof replacement today.

roof replacement atlanta