Roof Installation Rydal

When it comes time to do repair work on your Rydal roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own.

A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don’t have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it’s time to do something about it now. You don’t want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.

Choosing a Rydal Georgia Roof Installation Contractor

Now that you know that you must tackle this job, you need to see where the problem actually is coming from. If you are going to try to tackle this job on your own, then it’s time to do some investigating. The roof cavity is the best place to start. Check for signs of a leak, water stains, mold or moisture damage. Oftentimes, this may be in an attic area or around a chimney.

roof replacement near me

Roofing professionals are called professionals for a very good reason. They are skilled at their given profession, which in this case would be roofing. They know what needs to be done to fix a roof properly and they also have the tools and equipment to do the work. Also, a professional roofer is used to working on roofs. Their chances of falling and hurting themselves are much less than if you attempt to try it. There are many accidents each year by people who are not in good health attempting to climb on roofs to do the job themselves.

When choosing a professional, however, don’t be too hasty in making your decision. As in any profession, there are going to be variations on roofing companies. While some will be more expensive, some will cost less, but this doesn’t mean that they are going to do a good job. On the other hand, you must use good discretion and ask questions to make sure you are getting what you pay for.

A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.

roof replacement financing

Roof Replacement: Why Installing New Shingles Is Not a Do-It-Yourself Job

Materials commonly used in flat roof installation and repair:

Built-Up Roof

Otherwise referred to as tar or tar and gravel roof, this roof comprises of 3-5 layers of asphalt laminated with coal hot tar, hot asphalt or pitch. Gravel is finally added for protection from UV rays. This is now becoming less popular owing to its short life, abundant heat gain, non-energy efficient, requirement of continuous maintenance and aesthetically unpleasant nature.

Modified Bitumen

This is just modified asphalt to enhance the plastic and rubber-like properties. The commonly employed modifiers include Atactic Polypropylene and Styrene Butadiene Styrene. When this roof is properly installed, this can last up to around 15 years.

Metal Roof Installation

Metal roofs are installed normally with underlying asphalt saturated as well as coated roof. Underlayment is inadequate mostly in low slope roofs. It is better to apply an underlayment of asphalt, then modified bitumen product and finally a metal product. This roof is also less commonly installed owing to its expensive nature, limited material warranty, etc.

Single Ply Membrane

It is a myth that all single ply membranes are similar. The single ply membranes include different membranes and their performance varies. The main requirements of the single ply membrane nature that must be satisfied are being waterproof, non-flammable, compliant with building codes, easy to work with as well as repair, pliable at different temperatures and weldable. Most widely employed membranes are CPE, EPDM, Hypalon, TPO, PVC, CPA, etc.

TPO has been used only for the past ten years and hence its performance cannot be determined yet. EPDM, otherwise called rubber, is a black single ply. Many EPDM installations have failed owing to improper installation, material failure and harsh climates. CPA and PVC are similar in properties and performance, the only difference existing in the chemical composition and viability of material.

new roof for house

Roof Replacement: Why Installing New Shingles Is Not a Do-It-Yourself Job

Materials commonly used in flat roof installation and repair:

Built-Up Roof

Otherwise referred to as tar or tar and gravel roof, this roof comprises of 3-5 layers of asphalt laminated with coal hot tar, hot asphalt or pitch. Gravel is finally added for protection from UV rays. This is now becoming less popular owing to its short life, abundant heat gain, non-energy efficient, requirement of continuous maintenance and aesthetically unpleasant nature.

Modified Bitumen

This is just modified asphalt to enhance the plastic and rubber-like properties. The commonly employed modifiers include Atactic Polypropylene and Styrene Butadiene Styrene. When this roof is properly installed, this can last up to around 15 years.

Metal Roof Installation

Metal roofs are installed normally with underlying asphalt saturated as well as coated roof. Underlayment is inadequate mostly in low slope roofs. It is better to apply an underlayment of asphalt, then modified bitumen product and finally a metal product. This roof is also less commonly installed owing to its expensive nature, limited material warranty, etc.

Single Ply Membrane

It is a myth that all single ply membranes are similar. The single ply membranes include different membranes and their performance varies. The main requirements of the single ply membrane nature that must be satisfied are being waterproof, non-flammable, compliant with building codes, easy to work with as well as repair, pliable at different temperatures and weldable. Most widely employed membranes are CPE, EPDM, Hypalon, TPO, PVC, CPA, etc.

TPO has been used only for the past ten years and hence its performance cannot be determined yet. EPDM, otherwise called rubber, is a black single ply. Many EPDM installations have failed owing to improper installation, material failure and harsh climates. CPA and PVC are similar in properties and performance, the only difference existing in the chemical composition and viability of material.

roof installation companies