When it comes time to do repair work on your Lithia Springs roof, you have two options. You can either call a roofing contractor to do the work for you or you can do the repairs on your own.
A common problem with roofing repairs is that people tend to ignore them. Of course, if you are ignoring a problem, you don’t have to deal with it at all. However, as with most household problems, the longer you let them go, the more severe they become. If you have a leak in your home or see water damage on the ceiling, it’s time to do something about it now. You don’t want to wait until the leak gets worse or until the whole ceiling is damaged. However, this is what most people do.
Choosing a Lithia Springs Georgia Roof Installation Contractor
Now that you know that you must tackle this job, you need to see where the problem actually is coming from. If you are going to try to tackle this job on your own, then it’s time to do some investigating. The roof cavity is the best place to start. Check for signs of a leak, water stains, mold or moisture damage. Oftentimes, this may be in an attic area or around a chimney.
Roofing professionals are called professionals for a very good reason. They are skilled at their given profession, which in this case would be roofing. They know what needs to be done to fix a roof properly and they also have the tools and equipment to do the work. Also, a professional roofer is used to working on roofs. Their chances of falling and hurting themselves are much less than if you attempt to try it. There are many accidents each year by people who are not in good health attempting to climb on roofs to do the job themselves.
When choosing a professional, however, don’t be too hasty in making your decision. As in any profession, there are going to be variations on roofing companies. While some will be more expensive, some will cost less, but this doesn’t mean that they are going to do a good job. On the other hand, you must use good discretion and ask questions to make sure you are getting what you pay for.
A professional roofer should come to your property and take a look before giving you an estimate. Once the estimate is done, you should receive a copy of an invoice that lists each cost separately. This is important for when you compare various contractors. You want to make sure that the estimates you are receiving are for the same work and materials.
Commercial Roofing Leak Repair: What to Expect
Flat roofs are completely different from sloped roofs. Water can run down sloped roofs and go down to the drain. But that is not the case on flat roofs. The entire flat roof must have a layer of watertight seal so that water cannot come through the roof and cause leaks in the house. But like the sloped roof, flat roofs can get damaged and thus need roof repair. It's a good thing that you can do roof repair on flat roofs, as long as you know how to. How do you do it? Here's how.
The first thing you should do is to prepare the items you'll need for the roof repair. Get a mallet, roofing nails, putty knife, utility knife, brooms and roofing cement. These are all the materials needed to repair your flat roof.
To begin roof repair, go to your roof and locate the problems. If you found peeled regions or fractures on it, then do the following steps: Get rid of the dust and dirt on the roof using the broom. Roofing cement cannot stick on surfaces with dirt, that's why you need to make sure that the entire area is clean. Now cut a shape on to the area where the fracture or peel was discovered. If there are multiple fractures or peels, make use of the same shapes for uniformity. Use the cut shape to make a pattern on the replacement shingles. The size and shape that you create on the replacement shingle should be accurate. If you made a mistake on the size, create multiple replacement shingles so that the shingles can be on the same level as the area on it. Make another replacement shingle. This one must be at least 2 inches larger than the other shingles.
Put the putty knife in the area of the edges. Put roofing cement under the edges. Now, attach the shingle on the hole and nail it down. Cement the shingle. If you are going to use multiple shingles to level the area, the other shingles must not be cemented. Just hammer it down with nails. Tack down the larger replacement shingle on the area and put roofing cement on its edges for the seal.
If there are split shingles on your flat roof, then you need to do a different method. First, slash the shingle into two. Open the slashed area and put roofing cement on it. Use roofing nails to tack down the sides of the shingle. Add a replacement shingle using a similar method as described on the repairing of fractured areas.
Roof repair for your flat roof should now be done. You are now protected from water leaks in the meanwhile. Check your roof regularly to maintain it and prevent anymore leaks.
Roof Replacement Tips
Depending on the climate where the house is located, an asphalt shingle roof lasts anywhere from twenty to thirty years. Due to the long lifespan of the roof, many homeowners do not think about replacing it before the shingles significantly deteriorate. If a home has a shingle roof that displays any of the signs below, consult with a provider of roofing maintenance to determine whether the home needs roof replacement.
Loss of Shingle Granules
Loss of shingle granules is one of the first signs that shingles will need to be replaced soon. Initially, the loss of granules can be detected by inspecting the inside of the gutter. Because the granules are dense, they often sit in the trough as water runs over them. As the loss of granules progresses, shingles reveal their asphalt composition and darken. If the roof on a home has gradually darkened, the loss of shingle granules may be the cause.
In hot climates, shingle roof systems commonly develop small blisters that can fill with water. Although water filled blisters are more common on flat commercial roofs, they can occur on shingle ones as well. Over time, blisters that contain water may release moisture into the deck, and cause it to sag. Although severely blistered shingles may succeed at deflecting water for a few more months, having a provider of roof maintenance perform a roof replacement will prevent the roof deck from needing to be replaced, which is a significant expense considering the level of materials and labor that are involved.
Shingles may buckle for several reasons, including moss growing under the outer edge of the shingle, storm damage, and damage to the roof deck. Regardless of the cause of the buckling, it should be inspected as soon as possible to prevent significant leaks form developing. Buckled shingles have actually been displaced from their normal position, which allows water to flow underneath them and causes leaks that are visible on the inside of the ceiling.
Curling, which typically occurs from long-term weather exposure, signifies the last phase of a shingle's life. The curling begins at the front edge of the shingle, and may reach a point where the shingle appears almost cylindrical when it is viewed from the side. Some homeowners make the mistake of trying to nail curled shingles back in place. If the shingles do not crack from being plied back into place, the nails that hold them will cause small leaks. If enough nails are used, the entire deck could become saturated.
No homeowner likes to think about roof replacement, but after twenty to thirty years, most asphalt shingle roofs need to be replaced. If the shingles on a roof display a loss of granules, blistering, buckling, or curling, they are nearing - or have reached - the end of their lifespan. To prevent a home from experiencing water damage that is expensive to repair, have its roof inspected by a provider of roofing maintenance today.